0

Abstract

The rock units of Wadi El-shati were classified to group of clusters to explain the concentration of iron ore by using enhanced satellite image. The several images of single band of Thematic Mapper (TM7) of Landsat were combined to produce multispectral image bands. It was processed by group of filters after the false color image has been made. The filtered image was classified with unsupervised classification after the image ratio has been done by dividing band 3 on band1. Finally, we reached the classified image has concentration of iron tone.

Single carrier with frequency domain equalization (SC/FDE) substantially out performs OFDM in BER performance for Ultra Wideband (UWB), a result already reported. In this paper we provide an explanation and justify this superiority. We showed besides, by only a proper selection of both cyclic prefix duration and the period of fast Fourier transform an extra gain is obtainable. This performance enhancement is in favor of SC/FDE's superiority for UWB in the context of internet of things.

nitriding is a common method for improving the hardness , mechanical properties, wear and corrosion resistance of metals. Laser nitriding of metals is an efficient process, where the irradiation of surfaces in nitrogen atmosphere leads to the fast take-up of nitrogen in the irradiated surfaces. In this paper laser surface nitriding of carbon steel carried out by melting the surface of substrate using high power CW CO2 laser with nitrogen as shrouding environment. Laser tracks were arranged as single tracks with the use of various laser powers ranging from 0.8kW to 2.0 KW , and laser scanning rates from 120mm/min to 200 mm/min. The influence of laser beam power and laser scanning rates on the microstructure and hardness profiles analysed. The laser nitride layer studied using optical microscope, and scanning electron microscope. The laser surface nitriding of carbon steel led to refinement in the microstructure and the diffusion of nitrogen caused the formation of iron nitrides on the surface. The micro hardness of the nitride surface improved to a maximum of 400HV in the present set of laser processing conditions as compared to 150HV of as received substrate as a result of the appearance of marten site in the melted pool and heat effect zon

This paper presents a new high-capacity algorithm for audio watermarking for the purpose of embedding a watermark audio signal into an original audio signal. This algorithm uses DCT (discrete cosine transform) in combination with SVD (singular value decomposition), DWT (discrete wavelet transform), and CZT (chirp ztransform). For the purpose of ensuring high levels of imperceptibility and robustness, a low-frequency sub band of 1-level DWT is selected to embed the watermark, followed by DCT, CZT, and SVD. As a result, the proposed algorithm achieves a high capacity of 352800 bits per second while a good quality audio signal is maintained (having an objective difference grade of more than-0.04). It also provides high imperceptibility (a signal to noise ratio of more than 58 dB) and it is extremely resistant to common audio attacks, including requantizing, resampling, additive white Gaussian noise or AWGN, MP3 compression, and low-pass filtering. The proposed algorithm presents much better compared to the audio watermarking algorithms already existent.

Prosopis farcta (Banks & Sol.) J. F. Macbr. has been reported for the first time from Libya. This species is native in Asia. Flowering specimens of Prosopis farcta collected from Sokna Region about 650 Km south-east Tripoli. It is presented with updated nomenclature, taxonomic description, geographical distribution, place of occurrence in Libya, and field colored photographs are also provided. The voucher specimens were deposited in the Herbarium of Botany Department (ULT), University of , Tripoli, Libya.

In this paper, the discrete–time periodic static output feedback control design problem is considered. A

hybrid conjugate gradient methods are analyzed and studied to tackle an equivalent optimization problem of this

optimal control problem. Finally, the proposed algorithms are tested numerically through several test problems

from the benchmark collection.

The term “gel” is commonly used to refer to the defect that distorts a film product. Eliminating gel defects from polyolefin film products can be difficult, time-consuming, and expensive. The impact of crystallization in the blown film matrix of high-density polyethylene (HDPE) was investigated by scanning electron microscope (SEM). Unmelted spots (gels) in the films for both compared HDPEs were tested. Tensile strength and elongation percentage of films made with hexene is higher than for the films made with butene. The gels were bigger in size and higher in density in Lanufene® than in the Equate product. It was found that this gel was affected the mechanical and physical properties of the locally produced HDPE film. The flow that takes place in a melt flow index (MFI) experiment has been simulated for Lanufene® and Equategrades. The high MI enables the grade to be fit into the injection molding process. The melt index and melt flow index of Lanufene® are higher than the Equate product, while the melt flow ratio and density are lower. The percentage of Nu, Si, Cr, Al, C, and Fe in the gels determined by SEM was found to be higher in Lanufene® than Equate, except for the carbon element. Keywords: gel, HDPE film, crystallization, Lanufene®, Equate, scanning microscope

A novel non-blind audio watermarking algorithm, using chirp z-transform in combination with discrete wavelet transform and singular value decomposition, is presented in this paper. In the proposed method, a watermark audio signal (about 13 seconds in length) is hidden into an original audio signal (about 51 seconds in length) by applying discrete wavelet transform, chirp z-transform, and singular value decomposition. The effectiveness of the proposed algorithm has been tested using signal-to-noise ratio, objective difference grade (ODG), and normalised cross- correlation of watermarked audio signal under various common audio attacks. Experimental results demonstrate that the algorithm has a high capacity (352.8 kbps), without significant perceptual distortion (ODG > -0.29) and provides good robustness against common audio attacks, including: re-sampling, echo addition, MP3 compression, additive white Gaussian noise, re- quantisation, cutting, and low-pass filtering. This algorithm has a high capacity and excellent audio quality compared with other audio watermarking algorithms.

Biosynthesis of the metallic nanoparticle is gaining importance because it’s a single-step process, nontoxic, environmentally acceptable, and easily scaled up. The present study investigated the biosynthesis of silver nanoparticles (AgNPs) via reacting olive wastewater filtrate (OWF) with silver nitrate, and the formation of AgNPs was confirmed by a color change of the reaction mixture and visible spectrophotometry. Additionally, the influence of pH, reaction time, AgNO₃ concentration, temperature, and OWF volume on the proposed method was investigated. It was found that with increasing the previously mentioned parameters, the formation of the AgNPs was increased under the experimental conditions. The results showed that OWF represented a promising material for the biosynthesis of AgNPs.